7 Key points that Need your attention During your Plastic Product Design
There are many, many different elements of plastics design and balancing them can make the...
NexPCB Blog
Everything you need to get started to manufacture awesome IoT products. PCB, PCBA, EMS, SMT, Supply Chain and Sourcing.
How to Avoid Color Streaks and Gloss Difference in your Plastic Production
Today marks the last of our posts about common issues in your plastic production. This post belongs...
How to Avoid Silver Streaks and Splay Marks in Plastic Injection Molding
Today we are back with two new common issues in plastic production. If you are new here, this post...
How to avoid Black Specs, Ejector Pin Marks and Drag Marks in your Plastic Production
If you've been following us, you might have noticed that avoiding quality issues in your plastic...
How to Avoid Cracks and Burn Marks in your Plastic Production
After analyzing the Short Shot and 10 other plastic production issues, we decided to come back to...
The Basics of Display: View Angle and View Direction
When we introduced IPS in a previous article, we mentioned one of the biggest advantages was in...
The Basics of Display: In-Plane Switching
At the China International Display Industry Conference in 2018, JDI (Japan Display Inc) presented...
How to Avoid Sink Marks in Your Plastic Production
This post is the 11th article in our series about common issues that you can encounter during your...
How to Avoid Jetting and Gate Blush in your Plastic Production
Today, we continue our journey of exploration into the common issues that happen in plastic...
A primer on the Lithium Battery Production Process
Lithium batteries have entered people’s daily life on a large scale, but how much do you know about...
Basics of SMT Solder Paste Printing
Solder paste printing is a key part in the SMT (Surface Mount Technology) process. Since the solder...
The Basics of PCB Marking
1. The role of MARK
The "mark point" is also called the reference point and is the point of...
How to Avoid Warpage in your Plastic Production
This post is the 8th article in our series about common issues that you can encounter during your...
How To Increase The Rigidity of Your Plastic: The Rib Design
Plastics have a wide application to the products that many of us use every day. Plastics, when...
The SMT PCB Puzzle
When a printed circuit board (PCB) is fabricated, the overall size of the full board will be much...
The Basics of PCBA Coating
Finished electronics generally don't handle adversity well. Once an electronic board leaves the...